- EASY TO HANDLE AND PRACTICALLY MAINTENANCE-FREE. The Bulldog Nozzle has been designed for operation with recycling water and freshwater. This controlled rotation nozzle has been built with a clever oil-free braking system and can be used with either fresh or recycled water. The bulldog is almost maintenance-free and is very easily handled, offering the user a very efficient cleaning system. The slow rotating speed results in a longer jet time on targets and is devastating to even the toughest pipeline deposits. Please call or enquire online for price & availability.
- enz® Cutters without impact, 30mm-80mm These cutters are equipped with tungsten carbide tipped teeth and are able to remove various kinds of deposits such as calcareous layers, concrete, concrete sludge, roots and wood. Please call or enquire online for price & availability.
- This tool is especially suited to cleaning flat pipes and channels. The even construction with its rounded corners and edges provides the tool with ideal gliding properties. Ceramic nozzle inserts with flow straighteners and an optimally designed water jet deflection create compact and aggressive water jets. The low and compact construction allows many uses in various pipes and channels. The tool is particularly appropriate for removing mud and loose rubble in flat pipes and channels, e.g. run-off gutters. Max. Working pressure: 280 bar Please call or enquire online for price & availability.
- The enz® gliding nozzles are designed to give a small volume jet the ability to clean pipe walls up to 400mm in diameter. As a result, they work very close to the pipe wall and use very little water! Please call or enquire online for price & availability.
- Made of wear resistant hardened steel, the enz® Grenade bomb has been designed with jets set at both 10º & 30º and a heavy weight for its size. These factors allow the nozzle to travel in the lower half of the pipe. The nozzle provides a strong traction and effective removal of loose rubble, sand, stone and soft deposits. This nozzle can also be used for pre-cleaning before the use of an enz® Chain Flail head or Rootcutter. If a size you require is not listed please call or enquire online for price & availability.
- This rotating nozzle is fitted with 4 retracting cutting jets set at an angle of 45° to provide both thrust and maximum pipe wall cleaning. This nozzle can also be fitted with a forward nozzle or thruster nozzle’s if required. It is ideal for fat, silt or cleaning before CCTV surveys. Please call or enquire online for price & availability.
- These tools are a radical innovation for milling-off deposits in pipes. The enz® im-pact milling cutters are designed to remove the most stubborn deposits like concrete, injection cement, mineral deposits etc. They work with a percussion system of 600-3000 impulses per minute and up to 12 tons of impact force. Please ask for special equipment for plastic deposits! When using the pull rod (drawing device) the cutters can be driven with half the water quantity (from 200 mm). Please call or enquire online for price & availability.
- The Nozzle Extension Bar is used as a safetyliner to prevent nozzle turnback in pipe.
- Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes. L= Litres per minute R= Number of Rear Facing Jets F= Number of Front Facing Jets If a nozzle you require is not listed please call or enquire online for price & availability.
- For the first time, you can now cover diameters ranging between 600 and 3,000 mm (24 to 120 inches) with a single nozzle. You no longer have to connect anything together to make the nozzle functional. The P360 fits into a 600 mm manhole and is particularly light, weighing a little over 60 kilograms (130 pounds). This makes it easy to handle and transport. The propeller nozzle can be easily adjusted to suit the pipe diameter and for use with round, tapering, flat, or ovoid profiles. It's straightforward to clean even dry weather channels. If you have only a little water available, you can simply pull the nozzle along. In addition, the P360 has an extraordinary cleaning performance, which you can see when it's compared to a rival product (see the picture below). The new P360 is designed to be operated with recycled or fresh water. The P360's propeller has various options for fittings. Three propeller arms with three nozzle inserts each plus the separate rotational drive have to be adjusted to one another. Features:
- 1 nozzle for 600 mm - 3000 mm
- Light weight
- One product for all diameters
- Easy and quick to set up
- Recyclable water
- With or without thrust
- Dry weather interior cleaning
- Max. pressure 200 bar / 2,900 psi
- Min. flow Min. 250 l/min / 66 gpm
- Pipe diameter 600 - 3000 mm / 24 - 118 inch
- Manhole size 600 mm / 24 inch
- Connection thread 1 BSPP, 1 1/2“ BSPP, 1 NPT, 1 1/4“ NPT
- Weight 62 kg
- Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes. Please call or enquire online for price & availability.
- This rotating nozzle has 4 jets set at 80° for cleaning the pipe wall, and 3 rear mounted thrust jets to provide forward motion. This nozzle is used to clean pipes and ducts and is especially good at cleaning out pipe joints and junctions. Please call or enquire online for price & availability.
my account | Talk to the experts 1800 028 584
Sign up to receive the latest in product info, news & events
©2024 Sewer Equipment Company (Aust.). All Rights Reserved. Privacy Policy | Terms & Conditions | Returns Policy. Created by Chadd Hunter Creative.