- Debris Baskets are a great tool for anyone jetting upstream wanting to trap the downstream debris flow. Let the water flow through, and when full just pull up and dump. You might even find some gold in there. Available in sizes from 6″ to 24″. 7.6M (25 foot) rope included.
- The Quick-Lock BIG sleeve is a product for permanently and tightly sealing leaking pipe joints, radial cracks, and longitudinal cracks in large pipes and manholes of DN 800 and larger.
- The sleeve is 20 cm wide.
- The sealed area (between the circumferential seals) is approximately 12 cm.
- The materials used are permanently resistant in municipal wastewater systems.
- Their suitability must be ascertained for use in industrial or polluted wastewater.
- All tools & accessories listed below are compatible with Electric Eel Models C, D-5, R, RF, 325, 800 and work with 8’ and 10’ dual cables (all types) and 5/8” and 3/4” continuous cables.
- HDD-7 3” Tool for retrieving objects from pipeline
- ST-1 Right hand wound retrieving tool
- Sale!Special tool to retrieve eventually remaining rags lost spirals and tools from line.
- Air-Loc® Low Pressure Air-Testing system has been successfully used for pipeline testing for over thirty-five years. This method of testing pipelines has proven to be the fastest, most economical and accurate method for testing pipe. Air-Loc® Line Acceptance Kit. Used to perform a low-pressure air test from manhole to manhole. This is done by installing two Cherne Air-Loc plugs and using Cherne’s Air-Loc Panel to inflate the plugs and pressurise the pipeline. The test pressure is monitored for a predetermined amount of time for any decrease in pressure. If pressure drops less than 1 psi, the test passes. If a leak is detected, additional equipment is required to isolate the leak.
This product is available by special order. Please note that the pump is not included but can be purchased separately. For pricing and availability, please contact us.
- Out of stockCherne® Remo® Remote Placement Plug eliminates the need to enter confined spaces and speeds up the pipe plugging process in a safer and less expensive way than conventional plugging methods. NEW DESIGN.
- The Model 325 Gasoline powered sewer cleaner is designed to clean 100mm to 355mm diameter lines for distances up to 152M and is ideal for industrial, contractor, and municipal use.
- All tools & accessories listed below are compatible with Electric Eel Models C, D-5, R, RF, 325, 800 and work with 8’ and 10’ dual cables (all types) and 5/8” and 3/4” continuous cables.
- A-13DC For 75mm conductor lines
- A-14DC 3 ½” Diameter tool for 100mm or larger pipelines
- HDD-6 “S” Shaped for 150mm lines
- HDD-8 “S” Shaped for 200mm lines
- ST-2 Bulb shaped tool for 100mm plastic pipeline
- Replacement Guide Ball For SC10A Fitting for Electric Eel Model C
- The Handy-Clam is one of the most popular tools on the market for sewer cleaning. It allows you to clean manholes and catch basins and pits and wet wells and more from the surface level. The lower end has 2 clam shell shaped buckets that are actuated by the top handle. Once you open the bucket in the debris, you then can close the over center type handle that locks into place thus allowing you to raise the tool without spilling the contents you trapped. The big advantage is that we make these in knockdown models so you do not have to pay high truck freight rates for a Handy clam over 2M (8 feet) long. So when you buy a 3.6M (12’) clam is comes in two sections that are easily put together by the enclosed instructions. Plus you can use the clam as a 1.8M (6 footer) or a 3.6M (12 footer). This is a low stocked item. If not in stock, please contact [email protected] for estimated delivery time.
- The TST Safety Gloves are the latest in high pressure water protection. They protect the hands from dangerous water strikes up to 7500PSI. **Available in size 11 only The gloves are made with Dyneema, which is a fiber 15 times stronger than steel on a weight for weight basis. It is this material that allows the gloves to be extremely protective, without compromising on flexibility and comfort. The gloves come with inner nylon lining gloves to provide increased comfort for the operator. Protection Level 5/5/2
- Rotor 500 Bar/7500 psi
- Flat 500 Bar/7500 psi
- Single 200 Bar/3000 psi
- Piranha Series Slither™ Cover Jetting/Lateral Line Hoses are designed with an ultra slippery cover which allows the hose to manoeuvre around and through difficult sewer bends. Hoses are available in any length, standard male x male fittings; male swivel and female are available. Orange hose is 2500 psi. Blue hose is 3000 psi. A yellow polyolefin tube, single high tensile synthetic fiber braid reinforcement and abrasion resistant orange polyether-urethane cover. Features & Advantages:
- Materials - Constructed to provide rugged and reliable service under the most severe and demanding conditions.
- Yellow Color Tube - Assures the user that they are using a WASTEC designated Piranha Hose Product.
- Polyolefin or Seamless Thermoplastic Tube - Provides maximum resistance to hydrolysis.
- High Tensile One or Two Synthetic Fiber Braids - Contributes to low volumetric expansion and eliminates loss of strength from moisture absorption.
- Abrasion Resistant Polyether-Urethane - Polyurethane cover provides exceptional cut, abrasion and fungus resistance.
- Slither™ Cover - Cover is ultra slippery; allows hose to manoeuvre around and through difficult sewer bends.
- Pressure Testing - All Piranha factory-assembled hoses are 100% pressure tested.
- Reel Installation - Ideal for truck and trailer mounts.
- Pulls out roots, rocks, cans and other debris from manhole. Zinc Plated. 8" Wide. Connects to fibreglass poles.
- Sale!For most jobs, for stirring and breaking through chokings caused bu rags, papers or kitchen waste.
- RootX® is a simple, cost-effective and proven way to kill pipeline roots blocking sewer lines and septic systems.
- Full-Length Sewer Rehabilitation of Main- and House Sewer DN 30 - DN 1000 by Inversion method The DrainLiner method is best suited for the complete renovation of buried damaged gravity sewer pipes and pressurized pipelines. Perfectly matched and partly proprietary components ensure optimal results in the lining of:
- House sewers and lateral pipes
- Pipes inside buildings
- Main lines in the public area
- Leakage with or without groundwater infiltration or exfiltration at pipe joints, pipe walls, lateral junctions etc.
- Offset pipes, cracks and debris, ruptures
- Mechanical wear
- Corrosion
- Efficient time-saving installation
- Repairs damage in the pipe and joint regions even against strong infiltration.
- Enables installers to close obsolete lateral junctions.
- Repairs circular and egg-shaped pipes made of concrete, asbestos cement, plastics (PVC, PP, HDPE), cast iron, ductile cast iron, reinforced concrete and vitrified clay.
- Repairs entire pipe runs with size changes in between
- Long service life due to high-quality materials
- Inlet Water Filter for US Jet 4014, 4018, 4025 and 2036.
- Air-Loc® Leak Location Kit. If the line acceptance test indicates a leak in the sewer line, it becomes necessary to locate the leak(s) so that proper repairs can be made. A leak location (segment) test is accomplished by first stringing the sewer line using a Cherne Air-Loc Line Stringer or float line. Once strung, a winch cable is used to pull two Air-Loc Leak Locator plugs, which are attached together with an interconnect hose, through the pipeline in 22' intervals. Air is introduced between the plugs at each 22' increment until the test fails. Then, by moving the plugs back and forth, the leak can be isolated within two feet.
This product is a special order. Please contact us for price and availability.
- The Gripper® has become the most popular mechanical plug on the market. And our Gripper plug, like all Cherne mechanical plugs is great for long term applications. The “Original” Gripper® Plugs
- Ideal for plumbing system tests
- Made with glass reinforced ABS Plastic
- Extra-large wing nut (easy to install)
- Natural Rubber “O” Ring
- End of Pipe - seals only at the end of a pipe
Please contact us for other sizes if not seen in the dropdown box below.
- • The ultimate rooter glove • Hard PVC embedded palms • Easy to see, bright yellow • Durable PVC coated canvas outer shell • Soft jersey-lined inside • One size fits mostPicture shown as 2 pairs however gloves are sold individually (1 pair of gloves only)
- The Flat Trap is designed for the flat areas of the manhole or catch basin. This tool attaches to fiberglass poles and is available from 6″ wide to 12″ wide. Nice flat bottom and sharp edge allow you to get in the tight spaces and in the corners. Also used in septic systems, catch basins and around boat docks after a rain. Sizes Available: 152mm (6") Wide x 152mm (6") High Flat Trap Basket 203mm (8") Wide x 152mm (6") High Flat Trap Basket 254mm (10") Wide x 152mm (6") High Flat Trap Basket 304mm (12") Wide x 203mm (8") High Flat Trap Basket 381mm (15") Wide x 203mm (8") High Flat Trap Basket Please contact us for price and availability.
my account | Talk to the experts 1800 028 584
Sign up to receive the latest in product info, news & events
©2024 Sewer Equipment Company (Aust.). All Rights Reserved. Privacy Policy | Terms & Conditions | Returns Policy. Created by Chadd Hunter Creative.