- Air-Loc® Low Pressure Air-Testing system has been successfully used for pipeline testing for over thirty-five years. This method of testing pipelines has proven to be the fastest, most economical and accurate method for testing pipe. Air-Loc® Line Acceptance Kit. Used to perform a low-pressure air test from manhole to manhole. This is done by installing two Cherne Air-Loc plugs and using Cherne’s Air-Loc Panel to inflate the plugs and pressurise the pipeline. The test pressure is monitored for a predetermined amount of time for any decrease in pressure. If pressure drops less than 1 psi, the test passes. If a leak is detected, additional equipment is required to isolate the leak.
This product is available by special order. Please note that the pump is not included but can be purchased separately. For pricing and availability, please contact us.
- Out of stockCherne® Remo® Remote Placement Plug eliminates the need to enter confined spaces and speeds up the pipe plugging process in a safer and less expensive way than conventional plugging methods. NEW DESIGN.
- The Model 325 Gasoline powered sewer cleaner is designed to clean 100mm to 355mm diameter lines for distances up to 152M and is ideal for industrial, contractor, and municipal use.
- The enz® gliding nozzles are designed to give a small volume jet the ability to clean pipe walls up to 400mm in diameter. As a result, they work very close to the pipe wall and use very little water! Please call or enquire online for price & availability.
- All tools & accessories listed below are compatible with Electric Eel Models C, D-5, R, RF, 325, 800 and work with 8’ and 10’ dual cables (all types) and 5/8” and 3/4” continuous cables.
- A-13DC For 75mm conductor lines
- A-14DC 3 ½” Diameter tool for 100mm or larger pipelines
- HDD-6 “S” Shaped for 150mm lines
- HDD-8 “S” Shaped for 200mm lines
- ST-2 Bulb shaped tool for 100mm plastic pipeline
- Replacement Guide Ball For SC10A Fitting for Electric Eel Model C
- The Handy-Clam is one of the most popular tools on the market for sewer cleaning. It allows you to clean manholes and catch basins and pits and wet wells and more from the surface level. The lower end has 2 clam shell shaped buckets that are actuated by the top handle. Once you open the bucket in the debris, you then can close the over center type handle that locks into place thus allowing you to raise the tool without spilling the contents you trapped. The big advantage is that we make these in knockdown models so you do not have to pay high truck freight rates for a Handy clam over 2M (8 feet) long. So when you buy a 3.6M (12’) clam is comes in two sections that are easily put together by the enclosed instructions. Plus you can use the clam as a 1.8M (6 footer) or a 3.6M (12 footer). This is a low stocked item. If not in stock, please contact [email protected] for estimated delivery time.
- The TST Safety Gloves are the latest in high pressure water protection. They protect the hands from dangerous water strikes up to 7500PSI. **Available in size 11 only The gloves are made with Dyneema, which is a fiber 15 times stronger than steel on a weight for weight basis. It is this material that allows the gloves to be extremely protective, without compromising on flexibility and comfort. The gloves come with inner nylon lining gloves to provide increased comfort for the operator. Protection Level 5/5/2
- Rotor 500 Bar/7500 psi
- Flat 500 Bar/7500 psi
- Single 200 Bar/3000 psi
- Piranha Series Slither™ Cover Jetting/Lateral Line Hoses are designed with an ultra slippery cover which allows the hose to manoeuvre around and through difficult sewer bends. Hoses are available in any length, standard male x male fittings; male swivel and female are available. Orange hose is 2500 psi. Blue hose is 3000 psi. A yellow polyolefin tube, single high tensile synthetic fiber braid reinforcement and abrasion resistant orange polyether-urethane cover. Features & Advantages:
- Materials - Constructed to provide rugged and reliable service under the most severe and demanding conditions.
- Yellow Color Tube - Assures the user that they are using a WASTEC designated Piranha Hose Product.
- Polyolefin or Seamless Thermoplastic Tube - Provides maximum resistance to hydrolysis.
- High Tensile One or Two Synthetic Fiber Braids - Contributes to low volumetric expansion and eliminates loss of strength from moisture absorption.
- Abrasion Resistant Polyether-Urethane - Polyurethane cover provides exceptional cut, abrasion and fungus resistance.
- Slither™ Cover - Cover is ultra slippery; allows hose to manoeuvre around and through difficult sewer bends.
- Pressure Testing - All Piranha factory-assembled hoses are 100% pressure tested.
- Reel Installation - Ideal for truck and trailer mounts.
- Pulls out roots, rocks, cans and other debris from manhole. Zinc Plated. 8" Wide. Connects to fibreglass poles.
my account | Talk to the experts 1800 028 584
Sign up to receive the latest in product info, news & events
©2024 Sewer Equipment Company (Aust.). All Rights Reserved. Privacy Policy | Terms & Conditions | Returns Policy. Created by Chadd Hunter Creative.