Safety Insert Nozzle Guide to Suit FGLS Poles
$2,018.50TIME SAVER/ BACK SAVER/ELIMINATES FRUSTRATION.
Now, for the first time, you can positively put the nozzle where you want it.
Southland Tool in its continual effort to introduce new and exciting improvements to sewer cleaning presents the “nozzle directional guide”. This device connects to our interlocking pole systems.
Essentially it will grab and lock the end of your hose where the nozzle is so the operator can put it where he wants.
This is a low stocked item. If not in stock, please contact [email protected] for estimated delivery time.
Product Enquiry
Product Demo
Trelleborg DrainLCR-B
New Method for the Lateral Connection Repair of Underground House Sewers and Downpipes in Buildings
Main Pipe DN 100 – DN 200
Lateral DN 50 – DN 200 (at 30° – 90°)Trenchless repairs of lateral connections are rather tricky jobs to do. Many commonly available packer systems cannot cope with pipes having diameters of rarely more than DN 100 – and sometimes even additional pipe bends. Until the recent past, no repair system in the DN 100 to DN 150 range had been available for sealing junctions of down pipes, house sewers and lateral pipes, i.e. pipe sizes of DN 50 to DN 150.
With LCR-B (“B” stands for building), Trelleborg managed for the first time ever to scale down to lateral and house sewer sizes the LCR-S method (“S” stands for sewer) known from main line rehabilitation, in which a packer is used to invert a fibreglass “hat” profile into the main/lateral interface. As an alternative to the specifically developed hat profile, it is also possible to use a liner of the appropriate size.
The LCR-B hat profile in the main pipe seals the interface between the two pipe systems with its rim only, whereas the LCR-B liner is designed as a short liner in the down pipe or house sewer. The standard lateral repair length is 300 mm – the new LCR-B packer model allows a maximum repair length of 1300 mm.
The LCR-B liner and hat material is suitable for steam curing and has high mechanical properties and very good sealing capabilities. In order to reduce the curing time, Trelleborg Pipe Seals is offering a steam generator (SteamGen V3).
Behaviour in bends
Depending on the actual host pipe run or on wrinkles formed in the installed liner:
45° for DN 100 main line
90° for DN 125 or larger main line
Wall thickness of 2 to 3 mmBenefits
- Meets practical needs: Successful repairs with little equipment needs only, even in the presence of bends.
- Price advantage: Low investment cost, because you need to buy just the packers actually required.
- Practical: The low-weight mobile unit with low space requirements can be placed even in a small car.
- Flexibility: The job can be done with air push rods; no carriage needed.
- Accessibility: The LCR-B packers can be folded as required.
- No risk of fire: The resin system used for the liner system is self-extinguishing.
Please contact us for price & availability.
Product Enquiry
Product Demo
USJ-056 Wheel Rim – 8 Stud
Wheel Rim – 8 Stud Chrome suits US Jet 4018, 4025 and 2036.
Please contact us for price & availability.
Product Enquiry
Product Demo
Anti-Splash Manhole Roller Guide
The Saf-T-Guide is a manhole sewer hose roller guide with removable Lexan protection plates to keep sewer spray from leaving manhole.
Sizes Available:
Anti-Splash Manhole Roller Guide for 24″ 609mm (Aluminium) with Nylon Roller
Anti-Splash Manhole Roller Guide for 36″ 914mm (Aluminium) with Nylon Roller
Please contact us for price & availability.
Product Enquiry
Product Demo
Cherne Air-loc® Leak Locator Plugs
Air-Loc® leak locator plugs are designed for both low-pressure sewer line acceptance tests as well as leak location testing. Air-Loc® plugs can also be used to block flow by simply plugging the fill and readback ports.
Features:
- Eye bolts on both ends
- Easy-to-use quick-disconnect hose connections
- Rupture discs available
- Cross-biased cording on sizes 375-750mm, 600-1050mm, and 1000-1500mm
“Front” Air-Loc® Leak Locator Plugs also come equipped with:
- Color-coded inflation ports
- Removable air fittings
- Flexible internal hoses
- Field replaceable sleeves
Sizes:
AIR LOC LEAK LOCATOR PLUG 200-300MM, AIR LOC LEAK LOCATOR PLUG 300-450MM, AIR LOC LEAK LOCATOR PLUG 150-300MM
This product is a special order. Please contact us for price and availability.
Product Enquiry
Product Demo
Cherne i2 Series Plugs
Cherne i2-Series plugs are designed to meet the size and expansion needs of Australian markets, offering enhanced safety and performance with a robust, optimised design.
Available in various sizes, these compact plugs are made from premium natural rubber with full body cording, ensuring reliable, high-quality performance even in constrained spaces.
Please contact us for price and availability.
Product Enquiry
Product Demo
enz® Standard Nozzles
$69.56 – $828.03Made of wear-resistant, hardened steel, with a sturdy wall thickness for a long service life and a minimum of wear and tear. This nozzle is used to penetrate blockages and make an initial opening in a blocked line. The 30º jet angle provides positive thrust and a good cleaning of the pipe wall. All nozzles from 30.038 and above are fitted with ceramic insert jets as standard, this provides a service life twice as long as any comparable drilled nozzle.
L= Litres per minute
R= Number of Rear Facing Jets
F= Number of Front Facing Jets
If a nozzle you require is not listed please call or enquire online for price & availability.
Product Enquiry
Product Demo
Lid Sling Hook Bundle
From grates to maintenance holes, you encounter a wide range of covers in your daily work. When you need a tool that can handle the heavy lifting, rely on T&T Tools Inc.
Experience the convenience of our innovative Lid Sling Hook. This pocket-sized utility tool is incredibly compact and portable, designed by experienced field technicians to work with various maintenance hole covers, grates, and handhole lids. The Lid Sling Hook is ideal for professionals like utility locators, field technicians, inspectors, and surveyors.
Common Uses: The Lid Sling Hook is perfect for lifting and pulling manhole covers, vault covers, storm grates, and a variety of other tasks.
Estimated price $215 (plus GST)
Complete the form to pre-order today!
Product Enquiry
Product Demo
Manhole Lid Lifters
$171.60 – $280.50For easy lifting of access lids, get our long and short handled lid lifters.
*sold individually
Pull Out Turning Handle 8mm
$108.57Allows operator to push, turn or pull. Coupling is locked with a pin.
Smoke Generating Devices
$14.87 – $30.18TEMPORARILY OUT OF STOCK
Cherne Smoke Generating Devices (SGD), or “smoke bombs”, produce a thick, dense smoke that is highly effective for performing smoke tests. Smoke generating devices are time proven, simple to use, and can be used by themselves or with most smoke blowers on the market today.
Features:
- Produces a thick, dense smoke
- Time-proven
- Simple to use
- Can be used with most smoke blowers
- 3 minute bombs available with a double wick that allows units to be strung together for a longer smoke time
Available in:
30 Second (115 cubic meters)
60 Second (225 cubic meters)
3 minute double wick
Sold Individually
Trelleborg DrainLCR-S
Method for the Sectional Renovation of Lateral Junctions and Pipes in the Main Sewer Line
Main pipe: DN 130 to DN 600
Lateral pipe: DN 100, 125, 150 and 200 at 30° to 90°The DrainLCR-S system is used to repair and permanently seal main/lateral interfaces and connections up to 500 mm from the mainline down into the lateral.
The system can use either an LCR-S hat profile or an LCR-S liner.
The main-to-lateral interface in the main pipe is sealed only by the rim of the LCR-S hat profile, while the LCR-S liner in the main pipe is designed as a short liner.
Benefits:
- Reliable to install:
1. Inversion is not possible until positive engagement of the pathfinder.
2. The signal will not sound until complete inversion. - Technical advance: Only the inversion process allows pipe bends and offset joints to be relined.
- Meets practical needs: Successful repairs are possible with little equipment needs only, even in the presence of groundwater.
- Price advantage: Low investment cost, because you need to buy just the packers actually required.
- Practical: The low-weight mobile unit with low space requirements can be placed even in a small car.
- Flexible: It is also possible to use air push rods or a carriage.
- Accessibility: The LCR packers can be folded as required inside the manhole.
- User-friendly equipment: The LCR packers can be converted to other sizes as required.
Please contact us for price & availability.
Product Enquiry
Product Demo
- Reliable to install:
USJ-056-8 Wheel Rim – 8 Stud
Wheel Rim – 8 Stud suits US Jet 4018, 4025 and 2036.
Product Enquiry
Product Demo
Assembly Wrench
$78.54Used for assembly and disassembly of the rod couplings and nuts. The end of the handle is designed to fit the center hole of the coupling. 2 are recommended.
Cherne Air-Loc® Hydrostatic Test Pump
Hydrostatic Test Pumps are designed for pressure testing water lines and sewer force mains as prescribed by AWWA Standard C600 Installation of Ductile-Iron Water Mains and C605 Installation of PVC Pressure Pipe.
Aqua-Loc® Hydrostatic Test Pumps are designed to be the most user friendly in the industry. Both Diaphragm and Piston Style pumps are available and come powered by either a Honda or Briggs & Stratton engine.
Aqua-Loc® Hydrostatic Test Pump:
Diaphragm Style – Features:- Honda or Briggs Engine with low oil shut off
- Hypro® Twin diaphragm pump – 9.5 gpm/550 PSI
- Handles up to 10% chlorine solutions
- May be run dry
- Test pressures can be set from 100-550 psi
- Integral manifolds – eliminates leak points
- Enclosed gear reduction – excellent heat dissipation
- Pulsation dampener – no need to surge tank
Equipped with:
- Heavy-duty frame
- Hydraulic quick-disconnect – brass, swivel fitting
- Inline strainer – easy to clean clear bowl
- Clear hose – flow verification
- Silicone filled test gauge w/stainless steel case
This product is a special order. Please contact us for price and availability.
Product Enquiry
Product Demo
CL10 Magnetic Manhole Cover Lifter
Universal model with rectangular base ideal for lifting, moving and repositioning the majority of covers and grilles in cast iron and ferrous materials. The handle is telescopic and folding, minimising the space needed.
The exclusive configuration gives versatility of use in four ways to fit the majority of lifting/repositioning operations. The plate, with 16 powerful neodymium magnets assures a lifting force of 300kg with a weight of only 7kg.
Product Enquiry
Product Demo
enz® Pointed Nozzles
$155.27 – $1,843.16Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes.
L= Litres per minute
R= Number of Rear Facing Jets
F= Number of Front Facing Jets
If a nozzle you require is not listed please call or enquire online for price & availability.
Product Enquiry
Product Demo
enz® Standard Penetrator Nozzle
Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes.
L= Litres per minute
R= Number of Rear Facing Jets
F= Number of Front Facing Jets
If a nozzle you require is not listed please call or enquire online for price & availability.
Product Enquiry
Product Demo
Heavy Duty Tiger Tail Puma Hose Guide
Our new Super Heavy Duty Puma Tail hose guide is molded from a smooth bore rubber hose that holds up to abuse. These Puma Tails last longer to keep your workers on the job and avoid costly sewer hose damage. The cuffed ends are steel banded and silicone sealed. The attached 25ft. rope is attached with a super strong King Clamp with a rubber gasket around the guide.
Sizes available:
2″ Heavy Duty Tiger Tail Puma Hose Guide & 3″ Heavy Duty Tiger Tail Puma Hose Guide
Please contact us for price & availability.
Product Enquiry
Product Demo
PUMA Sewer Magnet 45KGS Capacity
$211.7545KGS Capacity. An overall metal retriever. Connects right to our fiberglass poles. Great tool for retrieving that lost tool; can lift valve covers. Comes with steel protective plate to protect magnet. Zinc plated.
Trelleborg Drain Packer Patch Kit
$181.50 – $275.00A perfect start into “No-Dig” business
You always need high-quality equipment to obtain high-quality results. The equipment tailored to the needs of the Trelleborg ShortLiner system offers all that is necessary to achieve high-quality results.
The Trelleborg ShortLiner Patch Kit simplifies your work. Available in various configurations, it’s ready to tackle single repairs in pipes ranging from 100 mm to 375 mm in diameter and repair lengths from 0.6 meters to 1.5 meters.
Product Enquiry
Product Demo
Trelleborg Resin Systems
Resin systems for full rehabilitation and sectional renovation of pipes and sewers.
Trelleborg Pipe Seals manufactures high-quality resin systems for the rehabilitation of sewers and wastewater pipes.
Three basic resin types are available:
- EpoxyResins for CIPP lining applications; and
- SilicateResins for lateral connection repairs and patches. Available in fast WOI, Winter and Summer.
Trelleborg ResinSystems have gained worldwide acceptance and are very popular among installers due to their patented technology and their permanently high quality.
Our broad range of resins and hardeners offers you the optimal solution for any case of repair (e.g. extreme infiltration).
Trelleborg Resin Systems
Two-component resin mixture made of component A (synthetic resin) and B (hardener)
Trelleborg EPROPOX resins are used in the Trelleborg DrainLiner methods (CIPP liners) as well as in the Trelleborg DrainLCR methods.
To be able to meet the varied needs of our installers, we developed a multitude of epoxy resin systems geared to specific applications.
These systems stand out for their improved mechanical properties, e.g. flexural modulus, flexural stress, TG and reduction factor, which are considerably higher than those found in conventional resin systems.
Thanks to their viscosity and surface tension, all EpoxyResin systems are extremely easy to handle, penetrate carrier materials quickly and provide very good mechanical properties and chemical strengths after final cure. Both filled and unfilled resin systems are available, depending on the particular application.
Silicate Resin Systems
These resin systems are used especially for lateral connection and short repairs (DrainLCR and DrainPacker).
They are easy to handle and quick to install and stand out for their good mechanical properties and chemical resistance after final cure.
The patented two-component resin mixture is made up of the components B (resin) and A (hardener) at a mixing ratio of 2:1 (by volume).
Benefits:
- Cures at ambient temperature within about 1 to 3 hours (cure times can be controlled and adjusted)
- Excellent performance both at extremely high and at extremely low temperatures
- Very good resistance to acids and caustics (pH 1 – 13.5) after final cure
- High temperature resistance of short/CIPP liner after final cure
- No volatile organic compounds (styrene free)
- Excellent adhesion to many pipe materials like vitrified clay, plastic, steel etc. with a close frictional and positive fit to HDPE pipes
- Virtually no shrinkage (<0.6%)
- Can be used at a wide range of ambient temperatures
- Excellent performance both at extremely high and at extremely low temperatures
- Expected service life of more than 50 years as proven by 10,000-hour test
- The cured resin is self-extinguishing and can thus be used in critical areas such as airports and tunnels
- Tested by independent bodies (IKT – Gelsenkirchen, WRc UK)
- In compliance with international standards such as DIBt, ASTM, WIS and DIN EN
Please contact us for price & availability.
Product Enquiry
Product Demo
APS90 Folding Manhole lever with Wheels (Lifting Cart) for Cover Lifters
$1,888.70APS90 is a multi-purpose, wheeled, folding lever designed for use in combination with the CL10, CL11, PM500, Mechanical Clamps and BT95 Lifting Bar. The lever guarantees fast, easy and safe operations in lifting, moving and repositioning manhole covers for underground water, sewerage, gas and telecommunications networks. The tool is “operator friendly” as these manoeuvres can be performed safely by pushing down rather than lifting. This means the spine is released and not compressed, eliminating potential back injuries.
Product Enquiry
Product Demo