JetCam 40

Steer through Bends To Inspect and Clean Laterals.

The new patent-pending JetCam™ 40 uses high-pressure water for propulsion, steering and cleaning as it captures live inspection video from inside lateral lines. Its novel design makes the JetCam™ 40 uniquely able to traverse multiple bends in the pipe; steer through branches; and levitate above debris. With these special capabilities, municipal contractors and commercial plumbers can locate failed pipes, cross-bores and blockages, as well as perform cleaning.

JetCam™ 40 is fully water-driven. Six propulsion nozzles generate the power needed to pull its own flexible hose through multiple bends, and a side nozzle on the camera can be aimed to steer through diverging pipes and hover past obstacles.

The system works with any high-pressure water source, including pressure washers and combination trucks.

Reel

• In stainless steel
• To pull out / fold down, with a security clutch
• Tires for an easy transport
• Stainless steel hose drum, with stopper and fold-down crank handle
• Can be operated in the positions: stand up or layed down

Water (high pressure)

• HP connection ½“ for connecting to your jetting machine, with cut off. Flow through: 35 – 120 liters / minute
• Manometer. Maximum pressure: 150 bar
• Surface hardened high-pressure hose, with best sliding qualities. Length NW 10 or 12,5 (½“): 35m till 60m, corresponding of the hose. Other length, other hose diameters, on demand).
• Flow through: max. 80 l / min (depending on the hose)

Nozzles

• 1x steering nozzle
• 1x backward jetting nozzles unit (with 6 nozzles)
• 1x stabilisation nozzle
• The nozzle inlets (0,8-1,6 mm) itself are variously changeable

Camera

• Camera head at the connectable HP hose unit, in stainless steel (Ø 32mm [1,26“], length 55mm [2,17“])
• Waterproofed up to 5 bar
• High-performance LED- cold light
• Excellent picture quality
• impressive color reproduction
• Camera with DSP (Digital Signal Processing)
• High resolution (360 lines)
• Wide angle objective: 145°
• Focus: fix
• TV- System: PAL / NTSC

Others

• With power supply: 220V 50Hz
• Battery (12 V DC, working hours: 2 hours)
• Meter indication in the camera picture
• TFT monitor 5,6 or 8 inches, with or without built-in digital video recorder. Recording directly on an SD card.
• SD cards with a capacity of max. 32 GB will be supported.
• Picture resolution: max. 1024 x 768 pix.
• Reinforced video out, 1x

Possible Accessories

• Centering egg in plastics (POM)
• Locating sender in the camera head

Downloads