Brands Archives - Page 7 of 9

Trelleborg DrainLCR-S
Method for the Sectional Renovation of Lateral Junctions and Pipes in the Main Sewer Line

Main pipe: DN 130 to DN 600
Lateral pipe: DN 100, 125, 150 and 200 at 30° to 90°

The DrainLCR-S system is used to repair and permanently seal main/lateral interfaces and connections up to 500 mm from the mainline down into the lateral.

The system can use either an LCR-S hat profile or an LCR-S liner.

The main-to-lateral interface in the main pipe is sealed only by the rim of the LCR-S hat profile, while the LCR-S liner in the main pipe is designed as a short liner.

Benefits:
- Reliable to install:
  1. Inversion is not possible until positive engagement of the pathfinder.
  2. The signal will not sound until complete inversion.
- Technical advance: Only the inversion process allows pipe bends and offset joints to be relined.
- Meets practical needs: Successful repairs are possible with little equipment needs only, even in the presence of groundwater.
- Price advantage: Low investment cost, because you need to buy just the packers actually required.
- Practical: The low-weight mobile unit with low space requirements can be placed even in a small car.
- Flexible: It is also possible to use air push rods or a carriage.
- Accessibility: The LCR packers can be folded as required inside the manhole.
- User-friendly equipment: The LCR packers can be converted to other sizes as required.
Please contact us for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
USJ-056-8 Wheel Rim – 8 Stud
Wheel Rim – 8 Stud suits US Jet 4018, 4025 and 2036.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
Cherne Air-Loc® Hydrostatic Test Pump
Hydrostatic Test Pumps are designed for pressure testing water lines and sewer force mains as prescribed by AWWA Standard C600 Installation of Ductile-Iron Water Mains and C605 Installation of PVC Pressure Pipe.

Aqua-Loc® Hydrostatic Test Pumps are designed to be the most user friendly in the industry. Both Diaphragm and Piston Style pumps are available and come powered by either a Honda or Briggs & Stratton engine.

Aqua-Loc® Hydrostatic Test Pump:
Diaphragm Style – Features:
- Honda or Briggs Engine with low oil shut off
- Hypro® Twin diaphragm pump – 9.5 gpm/550 PSI
- Handles up to 10% chlorine solutions
- May be run dry
- Test pressures can be set from 100-550 psi
- Integral manifolds – eliminates leak points
- Enclosed gear reduction – excellent heat dissipation
- Pulsation dampener – no need to surge tank
Equipped with:
- Heavy-duty frame
- Hydraulic quick-disconnect – brass, swivel fitting
- Inline strainer – easy to clean clear bowl
- Clear hose – flow verification
- Silicone filled test gauge w/stainless steel case
This product is a special order. Please contact us for price and availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
Cherne Remo® Accessories

A lightweight aluminum pole system which is used to place the Remo® plug in the sewer system. For longer then 1.8m use two poles with the Remo® Pole Adapter.

$139.64 – $153.56
enz® Pointed Nozzles
Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes.

L= Litres per minute

R= Number of Rear Facing Jets

F= Number of Front Facing Jets

If a nozzle you require is not listed please call or enquire online for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
$155.27 – $1,843.16
Out of Stock
enz® Standard Penetrator Nozzle
Designed to penetrate the toughest blockages the enz® pointed nozzle directs 30% of your jetters flow forward 15º through its hardened tip to break up and open the blockage. The remainder is exhausted at a 20º angle to provide positive thrust and penetrating power. Ideal for roots, silt, heavily blocked pipes and frozen pipes.

L= Litres per minute

R= Number of Rear Facing Jets

F= Number of Front Facing Jets

If a nozzle you require is not listed please call or enquire online for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
PUMA Sewer Magnet 45KGS Capacity

45KGS Capacity. An overall metal retriever. Connects right to our fiberglass poles. Great tool for retrieving that lost tool; can lift valve covers. Comes with steel protective plate to protect magnet. Zinc plated.

$211.75
Trelleborg Drain Packer Patch Kit
A perfect start into “No-Dig” business

You always need high-quality equipment to obtain high-quality results. The equipment tailored to the needs of the Trelleborg ShortLiner system offers all that is necessary to achieve high-quality results.

The Trelleborg ShortLiner Patch Kit simplifies your work. Available in various configurations, it’s ready to tackle single repairs in pipes ranging from 100 mm to 375 mm in diameter and repair lengths from 0.6 meters to 1.5 meters.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
$181.50 – $275.00
Trelleborg Resin Systems
Resin systems for full rehabilitation and sectional renovation of pipes and sewers.

Trelleborg Pipe Seals manufactures high-quality resin systems for the rehabilitation of sewers and wastewater pipes.

Three basic resin types are available:
- EpoxyResins for CIPP lining applications; and
- SilicateResins for lateral connection repairs and patches. Available in fast WOI, Winter and Summer.
Trelleborg ResinSystems have gained worldwide acceptance and are very popular among installers due to their patented technology and their permanently high quality.

Our broad range of resins and hardeners offers you the optimal solution for any case of repair (e.g. extreme infiltration).

Trelleborg Resin Systems

Two-component resin mixture made of component A (synthetic resin) and B (hardener)

Trelleborg EPROPOX resins are used in the Trelleborg DrainLiner methods (CIPP liners) as well as in the Trelleborg DrainLCR methods.

To be able to meet the varied needs of our installers, we developed a multitude of epoxy resin systems geared to specific applications.

These systems stand out for their improved mechanical properties, e.g. flexural modulus, flexural stress, TG and reduction factor, which are considerably higher than those found in conventional resin systems.

Thanks to their viscosity and surface tension, all EpoxyResin systems are extremely easy to handle, penetrate carrier materials quickly and provide very good mechanical properties and chemical strengths after final cure. Both filled and unfilled resin systems are available, depending on the particular application.

Silicate Resin Systems

These resin systems are used especially for lateral connection and short repairs (DrainLCR and DrainPacker).

They are easy to handle and quick to install and stand out for their good mechanical properties and chemical resistance after final cure.

The patented two-component resin mixture is made up of the components B (resin) and A (hardener) at a mixing ratio of 2:1 (by volume).

Benefits:
- Cures at ambient temperature within about 1 to 3 hours (cure times can be controlled and adjusted)
- Excellent performance both at extremely high and at extremely low temperatures
- Very good resistance to acids and caustics (pH 1 – 13.5) after final cure
- High temperature resistance of short/CIPP liner after final cure
- No volatile organic compounds (styrene free)
- Excellent adhesion to many pipe materials like vitrified clay, plastic, steel etc. with a close frictional and positive fit to HDPE pipes
- Virtually no shrinkage (<0.6%)
- Can be used at a wide range of ambient temperatures
- Excellent performance both at extremely high and at extremely low temperatures
- Expected service life of more than 50 years as proven by 10,000-hour test
- The cured resin is self-extinguishing and can thus be used in critical areas such as airports and tunnels
- Tested by independent bodies (IKT – Gelsenkirchen, WRc UK)
- In compliance with international standards such as DIBt, ASTM, WIS and DIN EN
Please contact us for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
USJ-126 Belt 3.5”

High Torque Drive Belt for US Jet 4018, 2036/ 3L41C and 3M41L Diesels.

$522.50
enz® Grenade Bomb Nozzles
Made of wear resistant hardened steel, the enz® Grenade bomb has been designed with jets set at both 10º & 30º and a heavy weight for its size. These factors allow the nozzle to travel in the lower half of the pipe. The nozzle provides a strong traction and effective removal of loose rubble, sand, stone and soft deposits. This nozzle can also be used for pre-cleaning before the use of an enz® Chain Flail head or Rootcutter.

If a size you require is not listed please call or enquire online for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
$161.74 – $769.04
Out of Stock

PUMA Shovels

Black steel shovels comes in various shapes. Connects to fibreglass poles.

$211.75 – $307.23
Smoke Fogger Fluid
Smoke/Fogger fluid that produce thick, dense smoke to effectively perform smoke tests.

Two types of smoke/fogger fluid Available
- 20L Petroleum based smoke fluid – Suits petrol smoke blower
- 25L Glycols and water based fogger fluid – Suits electric smoke blower
White Oil
$247.50 – $356.40
Trelleborg Drain Liner End Seal
Prevents infiltration between Liner and Host Pipe.

The Drain Liner End Seal utilizes the patented Slotted Band® to provide maximum sealing force with a minimum reduction in pipe diameter. This unique design captures the rubber and compresses it against the host pipe and new CIPP liner creating a permanent mechanical seal.

The patented Slotted Band is constructed from a single piece of Stainless Steel (EN 1.4307) precisely rolled to match the diameter of the CIPP liner. The unique shape of the Slotted Band provides the maximum amount of strength and sealing force with the least possible thickness.

The band is then expanded using a hydraulic expansion tool. As the band expands the integral latching mechanism progresses from slot to slot, positively locking on each one until the next one is reached. There is an audible click created by the spring/rubber interaction as the band is expanded into place.

Benefits
- Manufactured from EPDM Rubber and Stainless Steel to withstand the harsh sanitary sewer environment.
- Complies with material property requirements of ASTM C923
- Quick and easy to install
- Eliminates Infiltration/Exfiltration between the Liner and Host Pipe
Please contact us for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
USJ-470 Belt

High Torque Drive Belt for US Jet 4025/4L41C Diesel.

$451.00
CHE274018 – INFLATION HOSE 900mm. (3 FT)
$29.18
Cherne Plug Inflation Hoses
Inflation extension hoses to suit Cherne Plugs
- Suit plugs up to 381mm
- Schrader valve connection
- Available in sizes from 3M up to 20M
$48.62 – $145.20
enz® Flounder
This tool is especially suited to cleaning flat pipes and channels. The even construction with its rounded corners and edges provides the tool with ideal gliding properties.

Ceramic nozzle inserts with flow straighteners and an optimally designed water jet deflection create compact and aggressive water jets.

The low and compact construction allows many uses in various pipes and channels. The tool is particularly appropriate for removing mud and loose rubble in flat pipes and channels, e.g. run-off gutters.

Max. Working pressure: 280 bar

Please call or enquire online for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
PUMA Fibreglass Poles with Standard Weight Orange Quick Connect

We offer a full range of Fibreglass Pole sets. Hollow and foam filled. All come with a spring-loaded Male and Female quick connect couplings that allow you to use the full Puma Line of tools with your set. Available in 3′ and 6′ sections. A standard set is 4 ea. of 1.8M (6′) poles for a 7.3M (24′) reach.

$115.50 – $560.18
Trelleborg Drain Internal Joint Seal
Designed to restore joint integrity.

Pipe and manhole joints generally experience higher ground water pressure than the grade adjustment area of a manhole. When infiltration occurs due to deflection, offset or corrosion, the Internal Joint Seal is specifically designed to reestablish watertight conditions.

A = The portion of the seal which covers the pipe or manhole defect
B = The complete width of the seal once installed (includes the band compression area)

Benefits:
- Can be used in concrete, HDPE and most other types of pipe
- Installs easily with torque wrench and socket
- Extension seals available to expand coverage area
- WedgeLock expansion bands create a watertight seal capable of withstanding 10 m of external head pressure
Please contact us for price & availability.

Request a Quote Call to enquire
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
Cherne Test Pumps
Air-Max™ Test Pump
- Gauge raised from base for protection
- Durable Steel Barrel
- Textured steel base prevents pump from slipping
- Durable, no-kink hose
Air-Max™ Pro HV Test Pump
- Larger barrel diameter – fewer strokes per inflation
- Contoured solid wood handle
- Forged steel construction for extra toughness
- Gauge with molded rubber cover
- Traditional metal thumb lock
- 3′ hose with strain-relief
$64.26 – $96.67
Out of Stock

Chisel Popper

The Chisel Popper’s chisel style end is used for prying and popping where extra leverage is needed.

$100.10
enz Scraper Nozzles
A heavy nozzle for cleaning the bottom of pipes or channels between 200mm to 3m in diameter. Good for the removal of silt, gravel, sand and rubble.

Please call or enquire online for price & availability.

Request a Quote Call to enquire Book a demo
Product Enquiry

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Finance Required

Δ
Product Demo

First Name*

Last Name*

Business Name*

Email*

Phone Number*

State/Country*

Postal Code*

Type of Request*

Δ
Out of Stock

Threaded End Fibreglass Pole Standard Weight

Fibreglass Poles with Quick-Connect Ends: just one type from our full range of Fibreglass Pole sets. Hollow, Foam-Filled and Steel Reinforced that are super stiff. All come with a spring-loaded male and female quick connect couplings that allow you to use the full Puma line of tools with your set. Available in 3′ and 6′ sections. A standard set is 4 ea. of 6′ poles for a 24′ reach.

$214.83 – $958.65