The Electric Eel Model 325 is a portable, petrol-powered pipeline cleaner for 4″–14″ lines with working distances up to 500 ft, designed for municipal and industrial jobs.

The Model 325 combines a 6.5 HP industrial/commercial Briggs & Stratton engine with a 3-speed forward/reverse transmission and a self-feeding heavy-duty dual cable system to clear tough deposits efficiently.

A patented 1-1/4″ self-feeding heavy-duty dual cable powers cleaning without the operator handling the rotating cable. The right-hand wound outer coil and 5/8″ left-hand wound inner coil are both anchored to the coupling to reduce helixing and cable loss, while the open-spaced outer coil loosens deposits and augers them back. Snap-lock couplings join 8-ft sections quickly and securely.

A rugged 3-speed forward and reverse automotive transmission rotates the cable at approximately 350 RPM (1st & reverse), 650 RPM (2nd), and 1050 RPM (3rd) at full throttle, with an automotive clutch and foot-operated pedal for smooth control.

Power comes from a 6.5 HP 4-cycle Briggs & Stratton engine with recoil starter. The unit mounts on a 3/16″ steel base and rolls on 12″ pneumatic tyres with roller bearings; the removable handle aids transport and storage.

The Model 325 is professionally engineered to clean 4″ to 14″ diameter pipelines, with up to 500 ft capacity when used with the cable reel.

Initial Opening Tools
• HDD-2T — 2-3/8″ starting tool for 4″ pipelines with “P” trap.
• A-2DC — 2-3/8″ starting tool for completely blocked lines.
• A-2-3DC — 3″ tool for removing hard deposits in 4″ and larger lines.

Heavy-Duty Tools
• HDD-4S — heavy-duty clean-up tool for 4″ pipelines.
• HDD-5S — heavy-duty clean-up tool for 6″ pipelines.
• HDD-7S — heavy-duty clean-up tool for 8″ pipelines.

Finishing Tools
• HDD-6* — “S” shaped for 6″ pipelines.
• HDD-8* — “S” shaped for 8″ pipelines.
• HDD-10* — “S” shaped for 10″ pipelines.
• HDD-12* — “S” shaped for 12″ and 14″ pipelines.
*Available with or without tandem hub connector for thorough cleaning in 6″–14″ pipelines.

Retrieving & Feeding
• HDD-7 — 3″ retrieving tool.
• SC-13 — feeding tool to help start cable through traps and bends.

Cable & Couplings
• Heavy-duty dual cable supplied as (25) × 8-ft sections = 200 ft; patented snap-lock couplings—no set screws, nuts or loose pins.

Accessories
• SC-17 swivel cable puller (thread cable through pipeline).
• SA-4 sand auger tool (spade-type for culverts under roadways).
• Connector cable for finishing tools in tandem.
• Manhole guide tubes (set) to minimise cable kinkage; guide tube jack to anchor at manhole top.
• Cable reel — 500-ft capacity with hold-down and reel crank.
• Cable container — stores up to 56 ft of cable.

Municipalities and industrial operators who need an efficient, portable, petrol-powered pipeline cleaner; the convenient one-man operation saves time and money.

Key specifications (at a glance)

• Pipeline diameter: 4″–14″.

• Max working distance: Up to 500 ft (with cable reel).

• Engine: 6.5 HP 4-cycle Briggs & Stratton (recoil start).

• Drive: 3-speed F/R automotive transmission; 350 / 650 / 1050 RPM at full throttle.

• Cable system: 1-1/4″ self-feeding heavy-duty dual cable; snap-lock couplings, 8-ft sections.

• Chassis: 3/16″ steel base, 12″ pneumatic tyres with roller bearings; removable handle.